DIY Lampshades - at this point a lot of model homes, from minimalist to modern fancy, of course, when you search for home design model sesuakanlah the tastes and needs of your family, all right now on the blog Home Zone Design Guidelines we will discuss about DIY Lampshades please read because we have Make a special update for you.
![]()
And I bought another one so we could have two new bedside table lights.
I found some instructions on the Beach Vintage blog (because I am incapable of working out how to do these things on my own!).
I bought some fabric from Cloth Fabric (Kangaroo Paw in Surf on Cream), some cream ribbon and spray adhesive.
And began ...
It was trickier than I thought as the shades taper in slightly at the top so the fabric couldn't be cut on the straight and needed to wind around the shade so it wouldn't bubble when sprayed with adhesive.
The hot glue gun proved tricky too. I'd never used one before and didn't realise how quickly the glue set and can become lumpy if not let to spread. Cue: daughter #1 who is an expert and helped me glue on the ribbon.
Between us, the lampshades were done in no time and if you don't look too closely, they don't look too bad!
During the day and at night ...
I'm now going to make some cushions for the bed from Cloth Fabric remnant samples!
articles about DIY Lampshades has finished in the study, we hope you feel satisfied with less of this article and give you infirasi in building your dream home, if you will forgive please share this link http://happyhourlosangeles.blogspot.com/2011/06/diy-lampshades.html make it more useful for many people.
DIY Lampshades
So ... I had a plain lampshade that I thought could do with a zshush.
And I bought another one so we could have two new bedside table lights.
I found some instructions on the Beach Vintage blog (because I am incapable of working out how to do these things on my own!).
It was trickier than I thought as the shades taper in slightly at the top so the fabric couldn't be cut on the straight and needed to wind around the shade so it wouldn't bubble when sprayed with adhesive.
The hot glue gun proved tricky too. I'd never used one before and didn't realise how quickly the glue set and can become lumpy if not let to spread. Cue: daughter #1 who is an expert and helped me glue on the ribbon.
Between us, the lampshades were done in no time and if you don't look too closely, they don't look too bad!
During the day and at night ...
I'm now going to make some cushions for the bed from Cloth Fabric remnant samples!
articles about DIY Lampshades has finished in the study, we hope you feel satisfied with less of this article and give you infirasi in building your dream home, if you will forgive please share this link http://happyhourlosangeles.blogspot.com/2011/06/diy-lampshades.html make it more useful for many people.
